{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Lightweight revolving lathe centre 5
Article no.: 320652 5
Article code:
Product details
Technical Data
| Morse taper | MK5 | |
| Body ⌀ D | 69 mm | |
| Reach B | 103 mm | |
| largest centre point ⌀ 60° A | 32 mm | |
| maximum radial run-out | 0.006 mm | |
| Centre point length C | 40 mm | |
| maximum speed | 3,800 min-1 | |
| for workpiece weight | 800 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320652 5 | |
| EAN / GTIN | 4062406200305 | |
| Manufacturer number | 320652 5 |
Description
Version:
- Tip angle 60°.
- Lightweight version with slim body.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
Mainly used for machining small and smallest components on all types of lathes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Lightweight revolving lathe centre 5 |
|||
| for workpiece weight | 800 | 1,500 | 2,000 |
| Body ⌀ D | 69 | 88 | 88 |
| maximum speed | 3,800 | 3,000 | 3,000 |
| maximum radial run-out | 0.006 | 0.006 | 0.006 |
| Morse taper | MK5 | MK5 | MK5 |
| Centre point length C | 40 | 65 | 50.5 |
| largest centre point ⌀ 60° A | 32 | 40 | 40 |