{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Lightweight revolving lathe centre 4
Article no.: 320652 4
Article code:
Product details
Technical Data
| Morse taper | MT4 | |
| Body ⌀ D | 54 mm | |
| Reach B | 85.5 mm | |
| largest centre point ⌀ 60° A | 25 mm | |
| maximum radial run-out | 0.006 mm | |
| Centre point length C | 29.5 mm | |
| maximum speed | 5,000 min-1 | |
| for workpiece weight | 500 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320652 4 | |
| EAN / GTIN | 4062406200299 | |
| Manufacturer number | 320652 4 |
Description
Version:
- Tip angle 60°.
- Lightweight version with slim body.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
Mainly used for machining small and smallest components on all types of lathes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Lightweight revolving lathe centre 4 |
|||
| for workpiece weight | 500 | 500 | 800 |
| Body ⌀ D | 54 | 69 | 69 |
| maximum radial run-out | 0.006 | 0.006 | 0.006 |
| Reach B | 85.5 | 116 | 103 |
| Centre point length C | 29.5 | 53 | 40 |
| largest centre point ⌀ 60° A | 25 | 32 | 32 |
| Type of product | Centring drill | Centring drill | Centring drill |