{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Claw jaws set, 3 pieces, for chucks 1
Article no.: 313232 1
Article code:
Product details
Technical Data
| for chuck type ⌀ | 250 mm | |
| Slot width D | 12 mm | |
| Bore spacing b | 40 mm | |
| Tenon length A | 20 mm | |
| suitable for colour code | Röhm self-centring chucks and jaws; Schunk self-centring chucks and jaws | |
| Clamping range | 31 mm - 101 mm | |
| Type of product | Self-centring chuck jaws |
Identification numbers & Classifications
| Article number | 313232 1 | |
| EAN / GTIN | 2050001929303 | |
| Manufacturer number | 0139160 |
Description
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
For external clamping, ideally suited to clamping blanks.
For external clamping, ideally suited to clamping blanks.
Material:
Quality product made of 16MnCr5, hardened.
Suitable for:
Schunk self-centring chucks No. 313115; 313117; 313135; 313137, Röhm self-centring chucks Duro No. 313120; 313140 and other self-centring chuck systems.