{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Standard: DIN 6499 D
- Balance quality G at rotational speed: G 2.5 at 25,000 rpm
Product details
Technical Data
| for ER | 25 mm | |
| Standard | DIN 6499 D | |
| Balance quality G at rotational speed | G 2.5 at 25,000 rpm | |
| Overall length L | 20.5 mm | |
| External ⌀ D | 42 mm | |
| Thread | M32×1.5 | |
| maximum tightening torque | 140 Nm | |
| Type of product | Clamping nut |
Identification numbers & Classifications
| Article number | 309612 25 | |
| EAN / GTIN | 4045197645685 | |
| Manufacturer number | 309612 25 |
Description
Version:
Thread and taper ground in a single setup for highest concentricity.
With plain bearings, delivering lower friction and higher clamping force.
With plain bearings, delivering lower friction and higher clamping force.
With slots.
Suitable for:
All standard ER collet chucks.
Optional extras:
ER clamping wrench, No. 309680 − 309740.
Single open ended spanner (for size 16), No. 613300 size 25.
Single open ended spanner (for size 16), No. 613300 size 25.
Note:
Collet chuck and clamping nut are balanced separately!
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
ER plain bearing clamping nut 25 |
||
| External ⌀ D | 42 | 42 |
| Overall length L | 20.5 | 21 |
| Thread | M32×1.5 | M32×1.5 |
| maximum tightening torque | 140 | 140 |
| Standard | DIN 6499 D | DIN 6499 D |
| Balance quality G at rotational speed | G 2.5 at 25,000 rpm | G 2.5 at 25,000 rpm |
| Type of product | Clamping nut | Clamping nut |