{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Ťažný čap 45° utesnený, bez otvoru, Vhodné pre strmé kužele: 50
Article no.: 308760 50
Article code:
- Ťažný čap - norma: MAS 403
Product details
Technical Data
| Vhodné pre strmé kužele | 50 | |
| Vlastnosť otvoru | bez otvoru | |
| Ťažný čap - norma | MAS 403 | |
| ⌀ zväzku D | 38 mm | |
| ⌀ hlavy D1 | 23 mm | |
| Celková dĺžka L | 85 mm | |
| L1 | 45 mm | |
| Závit M | M24 | |
| maximálny krútiaci moment pre skrutkové spoje | 150 Nm | |
| vhodné pre strmý kužeľ s farebným kódom | SK 50 | |
| Rozmer cez steny | 30 mm | |
| Druh produktu | Ťažný čap |
Identification numbers & Classifications
| Article number | 308760 50 | |
| EAN / GTIN | 4045197223883 | |
| Manufacturer number | 308760 50 |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Ťažný čap 45° utesnený, bez otvoru, Vhodné pre strmé kužele: 50
on request
In stock
92 pieces in stock
16,70 €
plus VAT at the current rate
Prices plus delivery costs
|
|||||
| Ťažný čap - norma | MAS 403 | ISO 7388-3 | ISO 7388-3 | ISO 7388 | MAS 403 |
| ⌀ zväzku D | 38 mm | 36 mm | 36 mm | 36 mm | 38 mm |
| Celková dĺžka L | 85 mm | 74 mm | 74 mm | 65.5 mm | 85 mm |
| ⌀ hlavy D1 | 23 mm | 28 mm | 28 mm | 29.1 mm | 23 mm |
| maximálny krútiaci moment pre skrutkové spoje | 150 Nm | 150 Nm | 150 Nm | 150 Nm | 150 Nm |
| vhodné pre strmý kužeľ s farebným kódom | SK 50 | SK 50 | SK 50 | SK 50 | SK 50 |
| Rozmer cez steny | 30 mm | 30 mm | 30 mm | 30 mm | 30 mm |