{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Pull stud sealed, form A, with bore, suitable for steep tapers: 40
Article no.: 308610 40
Article code:
- Pull stud standard: ISO 7388-3
Product details
Technical Data
| suitable for steep tapers | 40 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 19 mm | |
| Overall length L | 54 mm | |
| L1 | 26 mm | |
| Thread M | M16 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Identification numbers & Classifications
| Article number | 308610 40 | |
| EAN / GTIN | 4045197150929 | |
| Manufacturer number | 308610 40 |
Description
Beschreibung:
Der Werkzeughalter wird über den Anzugsbolzen vom Spanngreifer der Spindel fest in die Spindel gezogen. Anzugsbolzen gibt es in verschiedenenAusführungen. Sie stellen ein wichtiges Bindeglied zwischen Maschine und Werkzeug. Die Anforderungen an Genauigkeit, Festigkeit und Zuverlässigkeit von Anzugsbolzen sind hoch.
Verwendung:
- Für Werkzeuge mit Steilkegelschaft DIN 69871 und JIS B 6339 (MAS-BT).
- In Bearbeitungszentren (Maschinen mit automatischem Werkzeugwechsler).
- In NC-Maschinen (Maschinen ohne automatischem Werkzeugwechsler).
Hinweis:
Bei Montage des AB auf korrektes Anzugsmoment achten.
ISO 7388-3 entspricht alter Norm DIN 69872.
Abgedichtet − mit O-Ring.
ISO 7388-3 entspricht alter Norm DIN 69872.
Abgedichtet − mit O-Ring.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Pull stud sealed, form A, with bore, suitable for steep tapers: 40 |
on request
Delivery in 3 - 4 working days
122 pieces in stock
CHF 11.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2,807 pieces in stock
13,92 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
214 pieces in stock
11,65 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
64 pieces in stock
11,65 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
11,65 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Collar ⌀ D | 23 mm | 23 mm | 23 mm | 23 mm | 23 mm | 23 mm |
| Thread M | M16 | M16 | M16 | M16 | M16 | M16 |
| Head ⌀ D1 | 19 mm | 19 mm | 19 mm | 15 mm | 15 mm | 15 mm |
| L1 | 26 mm | 26 mm | 26 mm | 35 mm | 35 mm | 35 mm |
| suitable for steep tapers | 40 | 40 | 40 | 40 | 40 | 40 |
| Hole characteristics | with bore | s otvorom | s otvorom | s otvorom | s otvorom | s otvorom |
| Type of product | Pull Stud | Ťažné čapy | Ťažný čap | Ťažný čap | Ťažný čap | Ťažný čap |