{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Boring bar for grooving 25 mm
Article no.: 278023 25
Article code:
- Through-coolant: yes
Product details
Technical Data
| Shank ⌀ Ds | 25 mm | |
| Groove width w | 3; 4 mm | |
| Application type | right-hand | |
| Through-coolant | yes | |
| tmax internal machining | 5 mm | |
| Minimum pre-drill ⌀ Dmin | 25 mm | |
| Centre offset L3 | 12 mm | |
| Overhang L1 recessed holders | 50 mm | |
| Overall length L | 200 mm | |
| Screw | 279816 6 (SW5; 5 Nm) | |
| axial grooving possible | yes | |
| Type of product | Boring bar |
Identification numbers & Classifications
| Article number | 278023 25 | |
| EAN / GTIN | 4062406381646 | |
| Manufacturer number | 278023 25 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Boring bar for grooving 25 mm |
||||
| Overall length L | 200 | 250 | 250 | 200 |
| Shank ⌀ Ds | 25 | 25 | 25 | 25 |
| Minimum pre-drill ⌀ Dmin | 25 | 30.5 | 30.5 | 25 |
| Application type | right-hand | right-hand | left-hand | left-hand |
| Centre offset L3 | 12 | 17.5 | 17.5 | 12 |
| Type of product | Boring bar | Boring bar | Boring bar | Boring bar |