{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
VC.T 110304, Grade: HB7010-1
Article no.: 261454 HB7010-1
Article code:
Product details
Technical Data
| ISO code indexable insert | VCMT 110304 | |
| Corner radius | 0.4 mm | |
| Grade | HB7010-1 | |
| Tool material | Carbide | |
| Main application | P | |
| Cutting conditions | continuous | |
| Chip breaker | SM | |
| Tolerance | M | |
| Cutting depth ap | 0.5 mm - 2.5 mm | |
| Feed f | 0.1 mm/rev. - 0.3 mm/rev. | |
| Cutting speed vc main application | 120 m/min - 440 m/min | |
| Number of changes/inserts | 2 | |
| Finishing/roughing assignment | Semi-roughing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 261454 HB7010-1 | |
| EAN / GTIN | 4045197780867 | |
| Manufacturer number | 261454 HB7010-1 |
Application Table
P
P
P
P
P
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||
|---|---|---|---|---|---|---|---|---|
VC.T 110304, Grade: HB7010-1 |
on request
In stock
370 pieces in stock
from
1
Pieces
from
10
Pieces
|
on request
In stock
499 pieces in stock
from
1
Pieces
from
10
Pieces
|
on request
In stock
315 pieces in stock
|
on request
In stock
342 pieces in stock
|
on request
In stock
184 pieces in stock
|
on request
In stock
399 pieces in stock
|
||
| Corner radius | 0.4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm | 0,4 mm |
| ISO code indexable insert | VCMT 110304 | VCMT 110304 | VCMT 110304 | VCMT 110304 | VCMT 110304 | VCMT 110304 | VCMT 110304 | VCMT 110304 |
| Cutting conditions | continuous | leicht unterbrochen | kontinuierlich | leicht unterbrochen | stark unterbrochen | leicht unterbrochen | leicht unterbrochen | leicht unterbrochen |
| Cutting depth ap | 0.5 mm - 2.5 mm | 0,5 mm - 2,5 mm | 0,5 mm - 2,5 mm | 0,5 mm - 2,5 mm | 0,5 mm - 2,5 mm | 0,3 mm - 2,5 mm | 0,5 mm - 2,5 mm | 0,5 mm - 2,5 mm |
| Chip breaker | SM | SM | VM | VM | SM | MM | PM | VM |
| Feed f | 0.1 mm/rev. - 0.3 mm/rev. | 0,1 mm/U - 0,3 mm/U | 0,1 mm/U - 0,4 mm/U | 0,1 mm/U - 0,3 mm/U | 0,1 mm/U - 0,3 mm/U | 0,05 mm/U - 0,35 mm/U | 0,12 mm/U - 0,3 mm/U | 0,1 mm/U - 0,4 mm/U |
| Type of product | Indexable insert for turning | Indexable insert for turning | Wendeschneidplatte zum Drehen | Wendeschneidplatte zum Drehen | Wendeschneidplatte zum Drehen | Wendeschneidplatte zum Drehen | Wendeschneidplatte zum Drehen | Wendeschneidplatte zum Drehen |