{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 252116 CA125P
Product details
Technical Data
| ISO code indexable insert | WNMG 080412 | |
| Corner radius | 1.2 mm | |
| Grade | CA025P | |
| Tool material | Carbide | |
| Main application | P | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | PS | |
| Tolerance | M | |
| Cutting depth ap | 1 mm - 3.8 mm | |
| Feed f | 0.15 mm/rev. - 0.6 mm/rev. | |
| Cutting speed vc main application | 70 m/min - 420 m/min | |
| Coating | CVD | |
| Number of changes/inserts | 6 | |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 252116 CA025P | |
| Manufacturer number | TMH00352 |
Application Table
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
WNMG 080412 CA025P |
|||
| Corner radius | 1.2 mm | 1.2 mm | 1.2 mm |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning |
| Cutting conditions | slightly interrupted | slightly interrupted | slightly interrupted |
| Chip breaker | PS | SM | WSM |
| Main application | P | P | P |
| Cutting speed vc main application | 70 m/min - 420 m/min | 120 m/min - 350 m/min | 120 m/min - 350 m/min |
| Tolerance | M | M | M |