{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DNMG 110408 HBT130
Article no.: 250781 HBT130
Article code:
Product details
Technical Data
| ISO code indexable insert | DNMG 150608 | |
| Corner radius | 0.8 mm | |
| Grade | HBT130 | |
| Tool material | Carbide | |
| Coating | TiCN | |
| Main application | M | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | MM | |
| Cutting depth ap | 0.5 mm - 5 mm | |
| Feed f | 0.12 mm/rev. - 0.45 mm/rev. | |
| Cutting speed vc main application | 50 m/min - 200 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 250781 HBT130 | |
| EAN / GTIN | 4062406256364 | |
| Manufacturer number | 250781 HBT130 |
Application Table
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
DNMG 110408 HBT130 |
|||
| Number of changes/inserts | 4 | 4 | 4 |
| ISO code indexable insert | DNMG 150608 | DNMG 110408 | DNMG 110408 |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Finishing |
| Tool material | Carbide | Carbide | Carbide |
| Cutting depth ap | 0.5 mm - 5 mm | 0.5 mm - 5 mm | 0.5 mm - 5 mm |
| Grade | HBT130 | HB7140-1 | HB7130-2 |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |