{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DNMG 110404, Grade: HB7120-1
Article no.: 250752 HB7120-1
Article code:
Product details
Technical Data
| ISO code indexable insert | DNMG 110404 | |
| Corner radius | 0.4 mm | |
| Grade | HB7120-1 | |
| Tool material | Carbide | |
| Main application | M | |
| Cutting conditions | continuous | |
| Chip breaker | VM | |
| Tolerance | M | |
| Cutting depth ap | 0.5 mm - 5 mm | |
| Feed f | 0.2 mm/rev. - 0.5 mm/rev. | |
| Cutting speed vc main application | 80 m/min - 260 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Semi-roughing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 250752 HB7120-1 | |
| EAN / GTIN | 4045197819772 | |
| Manufacturer number | 250752 HB7120-1 |
Application Table
M
M
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
DNMG 110404, Grade: HB7120-1 |
|||||
| Number of changes/inserts | 4 | 4 | 4 | 4 | 4 |
| ISO code indexable insert | DNMG 110404 | DNMG 110404 | DNMG 150608 | DNMG 110404 | DNMG 110404 |
| Finishing/roughing assignment | Semi-roughing | Skrubbearbejdning-sletbearbejdning | Skrubbearbejdning-sletbearbejdning | Finishing | Finishing |
| Cutting conditions | continuous | slightly interrupted | slightly interrupted | slightly interrupted | slightly interrupted |
| Cutting depth ap | 0.5 mm - 5 mm | 0.5 mm - 5 mm | 0.5 mm - 5 mm | 0.5 mm - 5 mm | 0.2 mm - 6 mm |
| Grade | HB7120-1 | HB7140-1 | HBT130 | HB7130-2 | HB725-1 |
| Main application | M | M | M | M | UNI |