{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 250322 HB7130-2
CNMG 120408 HB7140-1
Article no.: 250322 HB7140-1
Article code:
Product details
Technical Data
| ISO code indexable insert | CNMG 120408 | |
| Corner radius | 0.8 mm | |
| Grade | HB7140-1 | |
| Tool material | Carbide | |
| Main application | M | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | VG | |
| Cutting depth ap | 1.5 mm - 6 mm | |
| Feed f | 0.25 mm/rev. - 0.6 mm/rev. | |
| Cutting speed vc main application | 50 m/min - 210 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Roughing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 250322 HB7140-1 | |
| EAN / GTIN | 4045197820358 | |
| Manufacturer number | 250322 HB7140-1 |
Application Table
M
M
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
CNMG 120408 HB7140-1 |
||||
| ISO code indexable insert | CNMG 120408 | CNMG 120404 | CNMG 120408 | CNMG 120408 |
| Finishing/roughing assignment | Roughing | Roughing | Roughing | Roughing |
| Tool material | Carbide | Carbide | Carbide | Carbide |
| Cutting depth ap | 1.5 mm - 6 mm | 2 mm - 6 mm | 1.5 mm - 6 mm | 1.5 mm - 6 mm |
| Grade | HB7140-1 | HBT130 | HB7130-2 | HB7130-2 |
| Feed f | 0.25 mm/rev. - 0.6 mm/rev. | 0.15 mm/rev. - 0.55 mm/rev. | 0.25 mm/rev. - 0.6 mm/rev. | 0.25 mm/rev. - 0.6 mm/rev. |
| Cutting speed vc main application | 50 m/min - 210 m/min | 40 m/min - 180 m/min | 60 m/min - 220 m/min | 60 m/min - 220 m/min |