KUB Pentron® indexable drill Plain shank 19 mm

Article no.: 236614 19

⌀ D_c (mm):

Quantity

Drill depth for indexable insert drill up to: 2×D
Shank: ISO 9766
Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
Through-coolant: yes
Machining strategy: HPC

Product details

Series		KUB Pentron®
Nominal ⌀ D		19
Drill depth for indexable insert drill up to		2×D
Shank		ISO 9766
Use for drilling		limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
Through-coolant		yes
Machining strategy		HPC
Reach L₁		38 mm
for inch ⌀		3/4 in
Overhang L_A		56 mm
Shank ⌀ D_s		25 mm
Shank length L_s		56 mm
ISO code indexable insert		SOGX 060206 18-...
Pack of insert screws		239652 6IP2 (1.0 Nm)
Number of cutting edges Z		1
Type of product		Indexable drill

Bore tolerance: ⌀D − 0.1 / + 0.2

Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
Best dimensional accuracy under very difficult drilling conditions.
Stock costs reduced because internal and external inserts are identical.
Offset-axis drilling is possible up to V_max = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.

With indexable inserts No. 236605 − 236610.

Clamp screws (without indexable inserts).

Version 2×D and 3×D with ABS^® also available on request in imperial sizes.
Version with PSC shank available on request.

	This article	Recommendations
	KUB Pentron® indexable drill Plain shank 19 mm	Indexable drill combination shank 19 mm	GARANT Power Drill indexable drill Combination shank 19 mm	HOLEX Pro Drill indexable drill Combination shank 19 mm
Drill depth for indexable insert drill up to	2×D	2×D	2×D	2×D
Use for drilling	limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited cross-drilling	Centre drilling ;oblique spot drilling ;limited cross-drilling ;Aperture ;oblique exit ;convex	limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited cross-drilling	limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited oblique spot drilling
Shank	ISO 9766	DIN 6535 HE, DIN 6595	ISO 9766	ISO 9766
Shank length L_s	56	50	56	56
Machining strategy	HPC	MTC	HPC	HPC
Reach L₁	38	38	19	41
Overhang L_A	56	62	56	58