{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KUB Pentron® indexable drill Plain shank 35 mm
Article no.: 236601 35
Article code:
- Drill depth for indexable insert drill up to: 4×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | KUB Pentron® | |
| Nominal ⌀ D | 35 | |
| Drill depth for indexable insert drill up to | 4×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 140 mm | |
| for inch ⌀ | 1 3/8 in | |
| Overhang LA | 166 mm | |
| Shank ⌀ Ds | 40 mm | |
| Shank length Ls | 68 mm | |
| ISO code indexable insert | SOGX 110408 38-... | |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 236601 35 | |
| EAN / GTIN | 4047109201415 | |
| Manufacturer number | U44 33500 |
Description
Version:
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Bore tolerance: ⌀D − 0.1 / + 0.3
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version with PSC shank available on request.
Version with PSC shank available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
KUB Pentron® indexable drill Plain shank 35 mm |
||||
| Drill depth for indexable insert drill up to | 4×D | 4×D | 4×D | 4×D |
| Nominal ⌀ D | 35 | 35 | 35 | 15 |
| Shank | ISO 9766 | DIN 6535 HE, DIN 6595 | ISO 9766 | ISO 9766 |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | 239700 8IP (1.3 Nm) | 239700 15IP (2.8 Nm) | 232980 5 (TX15;3Nm) |
| Reach L1 | 140 mm | 140 mm | 140 mm | 143 mm |
| Type of product | Indexable drill | Indexable drill | Indexable drill | Indexable drill |
| Overhang LA | 166 mm | 169 mm | 166 mm | 171 mm |