{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Power Drill indexable drill ABS® shank, 5×D, ⌀ DC: 24mm
Article no.: 234025 24
Article code:
- Drill depth for indexable insert drill up to: 5×D
- Shank: ABS
- Use for drilling: limited drilling with oblique exit; limited oblique spot drilling; limited oblique spot drilling; limited oblique spot drilling; limited oblique spot drilling; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | Power Drill | |
| Nominal ⌀ D | 24 | |
| Drill depth for indexable insert drill up to | 5×D | |
| Shank | ABS | |
| Use for drilling | limited drilling with oblique exit; limited oblique spot drilling; limited oblique spot drilling; limited oblique spot drilling; limited oblique spot drilling; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 120 mm | |
| Overhang LA | 152 mm | |
| ABS® shank ⌀ Ds | 50 mm | |
| ISO code indexable insert | SOGX 080407 | |
| Pack of insert screws | 239700 8IP (1.3 Nm) | |
| Number of cutting edges Z | 2 | |
| Overall length L | 183 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 234025 24 | |
| EAN / GTIN | 4062406738921 | |
| Manufacturer number | 234025 24 |
Description
Version:
The helical coolant ducts ensure very high stability, since they do not weaken the core of the drill.
Bore tolerance: −0.1 / +0.35 mm
Bore tolerance: −0.1 / +0.35 mm
Description:
For maximum performance and dimensional accuracy. Even for difficult drilling situations up to 5×D.
Application:
Suitable for:
Inserts SOGX 080407.
Recommendation:
When spot-drilling reduce the feed rate to 70%.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
GARANT Power Drill indexable drill ABS® shank, 5×D, ⌀ DC: 24mm |
||||
| Number of cutting edges Z | 2 | 1 | 1 | 1 |
| Drill depth for indexable insert drill up to | 5×D | 4×D | 4×D | 4×D |
| Through-coolant | yes | yes | yes | yes |
| Shank | ABS | DIN 6535 HE, DIN 6595 | ISO 9766 | ISO 9766 |
| Pack of insert screws | 239700 8IP (1.3 Nm) | 239700 6IP1 (1.0 Nm) | 239700 8IP (1.3 Nm) | 232980 4 (TX9;1.2Nm) |
| Type of product | Indexable drill | Indexable drill | Indexable drill | Indexable drill |
| Overhang LA | 152 mm | 120 mm | 116 mm | 121 mm |