{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC17 32/3 mm
Article no.: 227505 32/3
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 15.7 mm | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 100 mm | |
| Shank ⌀ Ds h6 | 32 mm | |
| ⌀ D3 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 57 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Ramping angle αmax | 0.61 degrees | |
| Ramping length L for αmax | 23.6 mm | |
| suitable indexable insert | BDMT 170408 | |
| Insert screw | 229709 (T15; 3.5 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227505 32/3 | |
| EAN / GTIN | 4960664406661 | |
| Manufacturer number | THN63256 |
Description
Version:
Long cutting edges permit exceptionally large cutting depths.
Small number of cutting edges.
Small number of cutting edges.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Indexable milling cutter 90° MEC17 32/3 mm |
|||||
| Overhang L1 | 40 mm | 41 mm | 50 mm | 50 mm | 30 mm |
| Overall length Ltot | 100 mm | 110 mm | 110 mm | 110 mm | 105 mm |
| suitable indexable insert | BDMT 170408 | SOMT 09T304 | AP.. 1805.. | AP.. 16.. | LO.U0904.. |
| Shank type | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Shank ⌀ Ds h6 | 32 mm | 25 mm | 32 mm | 32 mm | 32 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |