{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC17 32/3L mm
Article no.: 227500 32/3L
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 15.7 mm | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 130 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| ⌀ D3 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 57 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Ramping angle αmax | 0.61 degrees | |
| Ramping length L for αmax | 23.6 mm | |
| suitable indexable insert | BDMT 170408 | |
| Insert screw | 229709 (T15; 3.5 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227500 32/3L | |
| EAN / GTIN | 4960664396184 | |
| Manufacturer number | THN03255 |
Description
Version:
Long cutting edges permit exceptionally large cutting depths.
Small number of cutting edges.
Small number of cutting edges.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Indexable milling cutter 90° MEC17 32/3L mm |
|||
| Overhang L1 | 40 | 40 | 55 |
| Overall length Ltot | 130 | 210 | 195 |
| suitable indexable insert | BDMT 170408 | AP.. 1335.. | AP.. 1003.. |
| Setting angle κ | 90 | 90 | 90 |
| ⌀ D3 | 25 | 29 | 29 |
| Circular interpolation milling ⌀ Dmax | 62 | 62 | 62 |
| Type of product | End / face mill | End / face mill | End / face mill |