{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH Harrier 80/7 mm
Article no.: 222065 80/7
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Machining strategy: HPC
Product details
Technical Data
| Shank type | with bore | |
| Milling application | Circular milling; Plunging; Ramping | |
| Machining strategy | HPC | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222065 80/7 | |
| EAN / GTIN | 4960664707683 | |
| Manufacturer number | THN07676 |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
High feed rate milling cutter MFH Harrier 80/7 mm |
|||||
| Number of cutting edges Z | 7 | ||||
| Milling application | Circular milling; Plunging; Ramping | Circular milling; Ramping | Circular milling; Ramping; Plunging | Circular milling; Ramping | Circular milling; Circular milling |
| Overall length Ltot | 50 mm | ||||
| Through-coolant | yes | ||||
| suitable indexable insert | RPK.1204M0T | ||||
| Shank type | with bore | with bore | with bore | with bore | with bore |
| ⌀ D3 | 68 mm | ||||