{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 32 mm | |
Number of cutting edges Z | 2 | |
Shank type | with threaded shank | |
Milling application | Circular milling; Plunging; Ramping | |
Machining strategy | HPC | |
Through-coolant | yes | |
⌀ D3 | 15 mm | |
maximum cutting depth ap max | 1.5 mm | |
maximum cutting depth ap max for LD geometry | 3.5 mm | |
Overall length Ltot | 40 mm | |
Mounting thread M | M16 | |
Circular interpolation milling ⌀ Dmin | 47 mm | |
Circular interpolation milling ⌀ Dmax | 62 mm | |
Ramping angle αmax | 1.43 degrees | |
Ramping length L for αmax | 14.4 mm | |
suitable indexable insert | SOMT.. | |
Indexable insert size | 10 | |
Insert screw | 229717 (15IP; 3.5 Nm) | |
Type of product | Copy mill |
Article number | 222060 32/2 | |
Manufacturer number | THN07552 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() High feed rate milling cutter MFH Harrier 32/2 mm |
||||
Number of cutting edges Z | 2 | 2 | 2 | 2 |
Milling application | Circular milling; Plunging; Ramping | Circular milling; Ramping | Circular milling; Ramping; Plunging | Circular milling; Ramping; Plunging |
Through-coolant | yes | yes | yes | yes |
suitable indexable insert | SOMT.. | RD..1604 | XD.. 120408 | XDM.120516 |
Cutting edge ⌀ DC | 32 mm | 32 mm | 32 mm | 32 mm |
⌀ D3 | 15 mm | 16 mm | 11 mm | 16 mm |
Ramping angle αmax | 1.43 degrees | 5.37 degrees | 1.64 degrees | 3.71 degrees |