{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH mini 50/8 mm
Article no.: 221965 50/8
Article code:
- Milling application: Plunging; Ramping; Circular milling
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 50 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | with bore | |
| Milling application | Plunging; Ramping; Circular milling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 43 mm | |
| maximum cutting depth ap max | 1 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| Circular interpolation milling ⌀ Dmin | 93 mm | |
| Circular interpolation milling ⌀ Dmax | 98 mm | |
| Ramping angle αmax | 0.42 degrees | |
| Ramping length L for αmax | 41.3 mm | |
| suitable indexable insert | LOGU 0303.. | |
| Insert screw | 229713 (8IP; 1.2 Nm) | |
| Setting angle κ | 15 degrees | |
| Fz Helix | 0.8 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221965 50/8 | |
| EAN / GTIN | 2050001929983 | |
| Manufacturer number | TX781477 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter MFH mini 50/8 mm |
||
| Setting angle κ | 15 degrees | 20 degrees |
| Through-coolant | yes | yes |
| suitable indexable insert | LOGU 0303.. | ANGX10T308ZE.R |
| ⌀ D3 | 43 mm | 44 mm |
| Ramping angle αmax | 0.42 degrees | 0.47 degrees |
| Ramping length L for αmax | 41.3 mm | 42.4 mm |
| Fz Helix | 0.8 | 0.8 |