{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH mini 25/4 mm
Article no.: 221955 25/4
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | Weldon shank | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 18 mm | |
| maximum cutting depth ap max | 1 mm | |
| Overhang L1 | 60 mm | |
| Overall length Ltot | 117 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 43 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 1.05 degrees | |
| Ramping length L for αmax | 16.3 mm | |
| suitable indexable insert | LOGU 0303.. | |
| Insert screw | 229713 (8IP; 1.2 Nm) | |
| Setting angle κ | 15 degrees | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221955 25/4 | |
| EAN / GTIN | 4960664741380 | |
| Manufacturer number | THN07625 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter MFH mini 25/4 mm |
||
| Number of cutting edges Z | 4 | 4 |
| Setting angle κ | 15 | 20 |
| Overall length Ltot | 117 | 140 |
| Cutting edge ⌀ DC | 25 | 25 |
| ⌀ D3 | 18 | 19 |
| Circular interpolation milling ⌀ Dmax | 48 | 48 |
| Type of product | Copy mill | Copy mill |