{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Chamfering angle reverse: 45
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Shank type | Weldon shank | |
| Chamfering angle reverse | 45 degrees | |
| Setting angle κ | 45 degrees | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Number of cutting edges Z | 2 | |
| ⌀ D | 16 mm | |
| maximum chamfering ⌀ Dmax | 28.3 mm | |
| Overhang L1 | 20.5 mm | |
| Overall length Ltot | 110 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| suitable indexable insert | SD.. 090308 | |
| Pack of insert screws | 219805 (15IP; 3.8 Nm) | |
| Type of product | Indexable end mill |
Identification numbers & Classifications
| Article number | 216100 16 | |
| EAN / GTIN | 4045197133465 | |
| Manufacturer number | 216100 16 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Chamfer mill 45° 16 mm |
|||
| Chamfering angle reverse | 45 | 45 | 45 |
| Number of cutting edges Z | 2 | 5 | 2 |
| Through-coolant | yes | yes | no |
| maximum chamfering ⌀ Dmax | 28.3 | 22.7 | 28.8 |
| Shank type | Weldon shank | Plain shank | Weldon shank |
| Shank ⌀ Ds h6 | 16 | 12 | 16 |
| Type of product | Indexable end mill | Indexable end mill | Indexable end mill |