{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Shank type | Weldon shank | |
Setting angle κ | 90 degrees | |
Milling application | End milling | |
Through-coolant | yes | |
Machining strategy | MTC | |
Tool exchange | PowerCard | |
Number of effective inserts Zeff | 2 | |
Number of indexable inserts | 3 | |
maximum cutting depth ap max | 19 mm | |
Overhang L1 | 50 mm | |
L2 | 9 mm | |
Overall length Ltot | 110 mm | |
Shank ⌀ Ds h6 | 25 mm | |
suitable indexable insert | AP.. 1003.. | |
Pack of insert screws | 219814 (8IP; 1.2 Nm) | |
Type of product | End / face mill |
Article number | 215840 25/2 | |
EAN / GTIN | 4045197702845 | |
Manufacturer number | 215840 25/2 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Shoulder mill 90°, Weldon shank, ⌀ D / number of effective cutting edges Z: 25/2mm |
|||||||
Milling application | End milling | End milling; Circular milling; Ramping | Circular milling; Ramping; End milling | Corner milling | Corner milling | End milling | Ramping |
Overall length Ltot | 110 mm | 105 mm | 105 mm | 105 mm | 105 mm | 105 mm | 100 mm |
Shank type | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank |
Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Shank ⌀ Ds h6 | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |