{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
- Machining strategy: MTC
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 90 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| ⌀ D3 | 17 mm | |
| Circular interpolation milling ⌀ Dmin | 37 mm | |
| Circular interpolation milling ⌀ Dmax | 38 mm | |
| Ramping angle αmax | 0.96 degrees | |
| Ramping length L for αmax | 14.85 mm | |
| suitable indexable insert | AP.. 1003.. | |
| Pack of insert screws | 219814 (8IP; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215800 20/3 | |
| EAN / GTIN | 4045197133168 | |
| Manufacturer number | 215800 20/3 |
Description
Application:
Universal application in all materials.
- Angle and slot milling, milling pockets, circular milling, bore milling, peripheral milling.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Shoulder mill 90° 20/3 mm |
||
| Number of cutting edges Z | 3 | 3 |
| Milling application | Circular milling ;Ramping ;End milling | End milling |
| suitable indexable insert | AP.. 1003.. | AP.. 1003.. |
| Cutting edge ⌀ DC | 20 | 20 |
| Shank ⌀ Ds h6 | 20 | 20 |
| Ramping angle αmax | 0.96 | 0.96 |
| Ramping length L for αmax | 14.85 | 14.85 |