{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut® 90° shoulder mill MTC long 32/3 mm
Article no.: 215157 32/3
Article code:
- Setting angle κ: 90
- Milling application: Corner milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: no
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Corner milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 50 mm | |
| Overall length Ltot | 250 mm | |
| Shank ⌀ Ds h6 | 32 mm | |
| ⌀ D3 | 26 mm | |
| Circular interpolation milling ⌀ Dmin | 58 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Circular interpolation milling ap | 1 mm | |
| Ramping angle αmax | 1.2 degrees | |
| Ramping length L for αmax | 23.95 mm | |
| suitable indexable insert | AP.. 1805.. | |
| Pack of insert screws | 219824 (15IP; 3.8 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215157 32/3 | |
| EAN / GTIN | 4045197349248 | |
| Manufacturer number | 215157 32/3 |
Description
Version:
High precision square shoulder milling cutter with irregular pitch for very smooth cutting, very high precision and cutting power. High performance indexable square shoulder milling cutter with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Without internal cooling.
Without internal cooling.
Application:
For face milling to large depths, also slotting. General use in all steels including stainless steels.
Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).