{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Softcut® | |
Cutting edge ⌀ DC | 40 mm | |
Number of cutting edges Z | 4 | |
Shank type | with bore | |
Setting angle κ | 90 degrees | |
Milling application | Corner milling | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
maximum cutting depth ap max | 6 mm | |
Overall length Ltot | 40 mm | |
Mounting bore ⌀ | 16 mm | |
suitable indexable insert | SO.. 0836.. | |
Pack of insert screws | 219863 (8IP; 2.2 Nm) | |
Type of product | End / face mill |
Article number | 214906 40/4 | |
EAN / GTIN | 4045197674456 | |
Manufacturer number | 214906 40/4 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
GARANT Softcut HSI wide pitch, with bore, ⌀ D / number of teeth Z: 40/4mm |
||||||||
Mounting bore ⌀ | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
Milling application | Corner milling | Corner milling | End milling | End milling | End milling | Corner milling | Corner milling | End milling |
Overall length Ltot | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm |
suitable indexable insert | SO.. 0836.. | SO.. 0836.. | SOMT 09T304 | AP.. 16.. | SOMT 09T304 | LO.. 130708 | LO.U0904.. | AP.. 16.. |
Shank type | with bore | with bore | with bore | with bore | with bore | with bore | with bore | with bore |
Cutting edge ⌀ DC | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |