{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Setting angle κ: 90
- Milling application: Corner milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Corner milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum cutting depth ap max | 6 mm | |
| Overhang L1 | 35 mm | |
| Overall length Ltot | 85 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| suitable indexable insert | SO.. 0836.. | |
| Pack of insert screws | 219863 (8IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 214902 20/2 | |
| EAN / GTIN | 4045197674197 | |
| Manufacturer number | 214902 20/2 |
Description
Version:
Wear-resistant heat-treated steel with corrosion-inhibiting coating. Precise indexable insert seating by use of appropriate torque. Wide and close tooth pitches for individual milling strategies.
Application:
Particularly suitable for machines with lower drive power and for machining at greater depths and small entry diameters.