{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut® HSI close pitch 40/3 mm
Article no.: 214857 40/3
Article code:
- Setting angle κ: 90
- Milling application: End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum cutting depth ap max | 10 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 16 mm | |
| suitable indexable insert | SO.. 1205.. | |
| Pack of insert screws | 219833 (15IP; 3.0 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 214857 40/3 | |
| EAN / GTIN | 4045197608819 | |
| Manufacturer number | 214857 40/3 |
Description
Version:
Individual tool geometry ensures very smooth cutting. Exceptionally sturdy insert design for best feed rates. Indexable inserts are secured by special screws with high shear resistance.
Application:
For outstanding surface quality. Burr-free milling.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Softcut® HSI close pitch 40/3 mm |
||
| Milling application | End milling | Corner milling ;Circular milling ;Ramping |
| Through-coolant | yes | yes |
| suitable indexable insert | SO.. 1205.. | AP.. 1805.. |
| Shank type | with bore | with bore |
| Cutting edge ⌀ DC | 40 | 40 |
| Setting angle κ | 90 | 90 |
| Type of product | End / face mill | End / face mill |