{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
FeedKing high feed rate indexable face mill 100/7 mm
Article no.: 212910 100/7
Article code:
- Through-coolant: yes
Product details
Technical Data
| Series | FeedKing | |
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 7 | |
| Through-coolant | yes | |
| ⌀ D3 | 79 mm | |
| maximum cutting depth ap max | 1.8 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| Circular interpolation milling ⌀ Dmin | 179 mm | |
| Circular interpolation milling ⌀ Dmax | 198 mm | |
| Circular interpolation milling ap | 1.85 mm | |
| Ramping angle αmax | 0.22 degrees | |
| Ramping length L for αmax | 78.5 mm | |
| suitable indexable insert | XD.. 120408 | |
| Pack of insert screws | 219800 (20IP; 5.7 Nm) | |
| Setting angle κ | 12 degrees | |
| Fz Helix | 0.7 |
Identification numbers & Classifications
| Article number | 212910 100/7 | |
| EAN / GTIN | 4045197514394 | |
| Manufacturer number | 212910 100/7 |
Description
Version:
Dynamic cutting edge geometry for highest feed rates. Extremely smooth cutting due to self-stabilising insert bedding. Optimised geometry for reduced cutting forces, thereby reducing the stress on the main spindle.
Advantage:
Particularly cost-effective due to exceptionally sturdy 4-edge inserts.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
FeedKing high feed rate indexable face mill 100/7 mm |
||||
| Setting angle κ | 12 degrees | 15 – 30 degrees | 15 – 30 degrees | 11 degrees |
| Milling application | Circular milling; Ramping | Circular milling; Ramping | Circular milling; Ramping; Plunging | |
| Overall length Ltot | 50 mm | 50 mm | 50 mm | 63 mm |
| Through-coolant | yes | yes | yes | yes |
| Shank type | with bore | with bore | with bore | |
| Cutting edge ⌀ DC | 100 mm | 100 mm | 100 mm | 100 mm |
| Fz Helix | 0.7 | 0.7 | 0.7 | 0.8 |