{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Power Q high feed rate indexable milling cutter 40/4 mm
Article no.: 212807 40/4
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
- Tool exchange: PowerCard
Product details
Technical Data
| Series | Power Q | |
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | Weldon shank | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 28 mm | |
| Overhang L1 | 50 mm | |
| Overall length Ltot | 110 mm | |
| Shank ⌀ Ds h6 | 32 mm | |
| Circular interpolation milling ⌀ Dmin | 68 mm | |
| Circular interpolation milling ⌀ Dmax | 78 mm | |
| Circular interpolation milling ap | 1 mm | |
| Ramping angle αmax | 1.35 degrees | |
| Ramping length L for αmax | 25.43 mm | |
| suitable indexable insert | XDM.090416 | |
| Setting angle κ | 16 degrees | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212807 40/4 | |
| EAN / GTIN | 4045197939074 | |
| Manufacturer number | 212807 40/4 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Power Q high feed rate indexable milling cutter 40/4 mm |
||
| Overhang L1 | 50 | 50 |
| Milling application | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping ;Plunging |
| Through-coolant | yes | yes |
| Shank type | Weldon shank | Weldon shank |
| Circular interpolation milling ⌀ Dmin | 68 | 70 |
| Ramping angle αmax | 1.35 | 1.25 |
| Type of product | Copy mill | Copy mill |