{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Milling head suitable for insert shape: round
- Milling application: Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 35 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with threaded shank | |
| Milling head suitable for insert shape | round | |
| Milling application | Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D1 h6 | 17 mm | |
| ⌀ D2 | 28.7 mm | |
| ⌀ D3 | 25 mm | |
| Overall length Ltot | 42 mm | |
| Mounting thread M | M16 | |
| Circular interpolation milling ⌀ Dmin | 60 mm | |
| Circular interpolation milling ⌀ Dmax | 68 mm | |
| Circular interpolation milling ap | 2 mm | |
| Ramping angle αmax | 1.79 degrees | |
| Ramping length L for αmax | 22.45 mm | |
| suitable indexable insert | RD..1003 | |
| Pack of insert screws | 219804 (15IP; 3.8 Nm) | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212135 35/5 | |
| EAN / GTIN | 4045197192745 | |
| Manufacturer number | 212135 35/5 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Copy mill 0° negative 35/5 mm |
|||||
| Number of cutting edges Z | 5 | 5 | 5 | 5 | 5 |
| Overall length Ltot | 42 | 42 | 42 | 40 | 42 |
| Through-coolant | yes | yes | yes | yes | yes |
| suitable indexable insert | RD..1003 | XD.. 070308 | RD..1003 | ANGX10T308ZE.R | RPK.10T3M0T |
| Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
| Cutting edge ⌀ DC | 35 | 35 | 35 | 35 | 35 |
| Type of product | Copy mill | Copy mill | Copy mill | Copy mill | Copy mill |