{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide torus cutter 12/0,5 mm
Article no.: 206230 12/0,5
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for copy milling; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Flute length Lc | 26 mm | |
| Corner radius R1 | 0.5 mm | |
| Overhang length L1 incl. recess | 36 mm | |
| Recess ⌀ D1 | 11 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.07 mm | |
| Feed fz for copy milling in short-chipping aluminium | 0.08 mm | |
| Shank tolerance | h6 | |
| Colour ring | yellow | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 206230 12/0,5 | |
| EAN / GTIN | 4045197860316 | |
| Manufacturer number | 206230 12/0,5 |
Application Table
N
480
N
440
N
400
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Description
Version:
With the latest generation of DLC coating sp2.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Tolerances:
R1 > 0.5 − 1.5 tolerance ±0.03.
R1 > 1.5 tolerance ±0.05.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Tolerances:
- Corner radius
R1 > 0.5 − 1.5 tolerance ±0.03.
R1 > 1.5 tolerance ±0.05.
Note:
NEW GENERATION AVAILABLE! Recommended successor product is No. 206255.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide torus cutter 12/0,5 mm |
|||||
| Overhang length L1 incl. recess | 36 mm | 36 mm | 38 mm | 38 mm | 36 mm |
| Cutting width ae for milling operation | 0.05×D for copy milling; 0.5×D for side milling | 0.05×D for copy milling; 0.5×D for side milling | 0.3×D for side milling; 0.05×D for copy milling | 0.3×D for side milling; 0.5×D for side milling | 0.5×D for side milling; 0.5×D for side milling |
| Through-coolant | no | no | no | no | no |
| Flute length Lc | 26 mm | 26 mm | 26 mm | 26 mm | 26 mm |
| Helix angle | 45 degrees | 45 degrees | 38 degrees | 40 degrees | 42 degrees |
| No. of teeth Z | 3 | 3 | 4 | 4 | 3 |
| Corner radius R1 | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm |