{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Diabolo solid carbide torus cutter HPC 3/1,0 mm
Article no.: 206162 3/1,0
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: e8
- No. of teeth Z: 2
Product details
Technical Data
| Series | Diabolo | |
| Cutting edge ⌀ DC | 3 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.2×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 2 mm | |
| Corner radius R1 | 1 mm | |
| Overhang length L1 incl. recess | 12 mm | |
| maximum shank recess dia. D6 | 4.3 mm | |
| Recess ⌀ D1 | 2.8 mm | |
| Overall length L | 80 mm | |
| Shank ⌀ Ds | 6 mm | |
| L2 | 40 mm | |
| Feed fz for side milling in steel < 65 HRC | 0.019 mm | |
| Feed fz for copy milling in steel < 65 HRC | 0.019 mm | |
| Shank tolerance | h6 | |
| Colour ring | red | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 206162 3/1,0 | |
| EAN / GTIN | 4045197597755 | |
| Manufacturer number | 206162 3/1,0 |
Application Table
P
180
H
170
H
140
H
135
H
100
Description
Version:
GARANT Diabolo:
Special geometry, coating and carbide for hard machining.
For copy milling with angle α: 1° 30′. Double relief ground side clearance angle.
Tolerances:
Special geometry, coating and carbide for hard machining.
For copy milling with angle α: 1° 30′. Double relief ground side clearance angle.
Tolerances:
- Corner radius: R1= ±0.005 mm.
- Angle α= ±20′.
Note:
Standard application values: fz for ap = 0.1×D.