{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill MTC, TiAlN, ⌀ d11 DC: 12mm
Article no.: 205718 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Milling profile: HR
- Tolerance nominal ⌀: d11
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.1×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 24 mm | |
| Overhang length L1 incl. recess | 60 mm | |
| Recess ⌀ D1 | 11.5 mm | |
| Overall length L | 120 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.25 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.05 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.056 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205718 12 | |
| EAN / GTIN | 4045197362902 | |
| Manufacturer number | 205718 12 |
Application Table
P
120
P
95
P
85
P
80
P
70
H
70
H
60
M
50
M
35
K
70
Description
Version:
Dimensions similar to DIN 6527.
Optimised special knuckle profile for roughing.
Very high rate of metal removal.
Can be used as a universal end mill.
Optimised special knuckle profile for roughing.
Very high rate of metal removal.
Can be used as a universal end mill.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||
|---|---|---|---|---|---|---|---|---|
Solid carbide roughing end mill MTC, TiAlN, ⌀ d11 DC: 12mm |
||||||||
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.1×D for side milling | Full slot cutting depth 1×D; 0.15×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | 0.1×D for side milling |
| Through-coolant | no | no | no | no | no | no | yes | no |
| Tolerance nominal ⌀ | d11 | f8 | d11 | d11 | d11 | d11 | d11 | e8 |
| No. of teeth Z | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Corner chamfer width at 45° | 0.25 mm | 0.15 mm | 0.5 mm | 0.25 mm | 0.25 mm | 0.25 mm | 0.25 mm | 0.5 mm |
| Shank ⌀ Ds | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |