{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing slot drill MTC 8 mm
Article no.: 205711 8
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Milling profile: HR
- Tolerance nominal ⌀: d11
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 16 mm | |
| Overhang length L1 incl. recess | 26 mm | |
| Recess ⌀ D1 | 7.5 mm | |
| Overall length L | 64 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in titanium > 850 N/mm2 | 0.02 mm | |
| Feed fz for side milling in titanium > 850 N/mm2 | 0.025 mm | |
| Colour ring | pink | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205711 8 | |
| EAN / GTIN | 4045197541918 | |
| Manufacturer number | 205711 8 |
Application Table
P
120
P
105
P
100
P
70
S
50
K
90
Description
Version:
Dimensions similar to DIN 6527.
Optimised special knuckle profile for roughing.
Very high rate of metal removal.
With semi-roughing knuckle profile and 45° flutes for superalloys.
Optimised special knuckle profile for roughing.
Very high rate of metal removal.
With semi-roughing knuckle profile and 45° flutes for superalloys.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
fz for ap max = 0.5×D.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide roughing slot drill MTC 8 mm |
|||||
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling |
| Cutting edge ⌀ DC | 8 mm | 8 mm | 8 mm | 8 mm | 8 mm |
| Flute length Lc | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
| Tolerance nominal ⌀ | d11 | d11 | d11 | d11 | d11 |
| Machining strategy | MTC | HPC | HPC | MTC | MTC |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |