{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel SlotMachine solid carbide roughing end mill HPC, TiAlN, ⌀ d11 DC: 8mm
Article no.: 205556 8
Article code:
- Schneidstoff: solid carbide
- Standard: Manufacturer’s standard
- Milling profile: NR
- Toleranz Nenn-⌀: d11
- No. of teeth Z: 5
Product details
Technical Data
| Series | Master Steel | |
| Cutting edge ⌀ DC | 8 mm | |
| Beschichtung | TiAlN | |
| Schneidstoff | solid carbide | |
| Standard | Manufacturer’s standard | |
| Milling profile | NR | |
| Toleranz Nenn-⌀ | d11 | |
| No. of teeth Z | 5 | |
| Spiralwinkel | 42 degrees | |
| Spacing of the cutters | unequal spacing | |
| Zustellrichtung | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.3×D for side milling | |
| Schaft | DIN 6535 HB to h6 | |
| Innenkühlung | no | |
| Machining strategy | HPC | |
| Flute length Lc | 21 mm | |
| Overhang length L1 incl. recess | 62 mm | |
| minimum shank recess dia. D5 | 7.2 mm | |
| maximum shank recess dia. D6 | 7.8 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0.4 mm | |
| Corner chamfer angle | 45 degrees | |
| Vorschub fz für Besäumen in Stahl < 900 N/mm2 | 0.05 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 205556 8 | |
| EAN / GTIN | 4062406112127 | |
| Manufacturer number | 205556 8 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
180
P
170
P
150
P
130
P
100
M
45
M
30
K
180
Description
Version:
With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core.
Plunge angle of up to 10° possible thanks to generous recess on the front face.
Plunge angle of up to 10° possible thanks to generous recess on the front face.
Application:
For roughing machining.
Note:
Particularly long neck recess for avoiding interference contours.
With conically increasing recess to guarantee stability at long overhangs.
With conically increasing recess to guarantee stability at long overhangs.