{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill, short HPC 16 mm
Article no.: 205486 16
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Milling profile: HR
- Tolerance nominal ⌀: d11
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 4 | |
| Helix angle | 20 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 22 mm | |
| Overall length L | 82 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer width at 45° | 0.7 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.08 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.1 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205486 16 | |
| EAN / GTIN | 4045197555311 | |
| Manufacturer number | 205486 16 |
Application Table
N
270
N
190
P
115
P
100
P
95
P
65
P
55
M
55
K
85
Description
Version:
Dimensions similar to DIN 6527.
For high feed rates, very high metal removal rate.
With 20° helix.
For high feed rates, very high metal removal rate.
With 20° helix.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product No. 205704.
Recommended successor product No. 205704.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide roughing end mill, short HPC 16 mm |
||||
| Colour ring | without | without | without | without |
| Overall length L | 82 mm | 82 mm | 82 mm | 82 mm |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Cutting edge ⌀ DC | 16 mm | 16 mm | 16 mm | 16 mm |
| Helix angle | 20 degrees | 30 degrees | 30 degrees | 45 degrees |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Corner chamfer width at 45° | 0.7 mm | 0.4 mm | 0.1 mm | 0.1 mm |