{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 10 mm
Article no.: 203612 10
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 40 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.072 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203612 10 | |
| EAN / GTIN | 4045197964113 | |
| Manufacturer number | 203612 10 |
Application Table
N
600
N
400
P
190
P
170
P
160
P
95
M
90
K
120
Description
Version:
High stability and extremely smooth cutting action due to at least 6 teeth. Eccentric relief ground. For profile milling as a finishing operation.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide milling cutter 10 mm |
|||
| Coating | TiAlN | TiAlN | TiAlN |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Flute length Lc | 40 mm | 40 mm | 40 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Tolerance nominal ⌀ | h10 | f8 | 0 / -0.03 |
| Shank ⌀ Ds | 10 mm | 10 mm | 10 mm |
| Type of product | End / face mill | End / face mill | End / face mill |