{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide high precision milling cutter 12 mm
Article no.: 203540 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Milling application | Mono milling tools high-precision 90° | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Flute length Lc | 65 mm | |
| Overall length L | 120 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.06 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203540 12 | |
| EAN / GTIN | 4045197509918 | |
| Manufacturer number | 203540 12 |
Application Table
P
200
P
160
P
140
P
115
P
100
H
40
M
80
M
65
K
175
Description
Version:
High stability and extremely smooth cutting action due to at least 6 teeth. Eccentric relief ground.
Extremely high taper accuracy with tolerances in the µm range, for precise 90° angles and plane-parallel surfaces in profile milling.
For the most demanding angular accuracy.
Cutter corner chamfer undefined due to eccentric relief grinding.
With maximum 0.014 mm tapering.
Extremely high taper accuracy with tolerances in the µm range, for precise 90° angles and plane-parallel surfaces in profile milling.
For the most demanding angular accuracy.
Cutter corner chamfer undefined due to eccentric relief grinding.
With maximum 0.014 mm tapering.
Application:
For peripheral milling as a finishing operation.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide high precision milling cutter 12 mm |
|||
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees |
| Flute length Lc | 65 mm | 56 mm | 16 mm |
| Helix angle | 45 degrees | 45 degrees | 45 degrees |
| Tolerance nominal ⌀ | f8 | h10 | h10 |
| Feed fz for side milling in steel < 900 N/mm2 | 0.06 mm | 0.08 mm | 0.08 mm |
| No. of teeth Z | 6 | 6 | 6 |
| Direction of infeed | horizontal | horizontal | horizontal |