{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide high precision milling cutter 16 mm
Article no.: 203530 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Milling application | High-precision 90° mono milling tools | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Flute length Lc | 32 mm | |
| Overhang length L1 incl. recess | 42 mm | |
| Recess ⌀ D1 | 15 mm | |
| Overall length L | 92 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.08 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203530 16 | |
| EAN / GTIN | 4045197352842 | |
| Manufacturer number | 203530 16 |
Application Table
P
250
P
200
P
175
P
145
P
120
H
50
M
100
M
80
K
220
Description
Version:
High stability and extremely smooth cutting action due to at least 6 teeth. Eccentric relief ground.
Extremely high taper accuracy with tolerances in the µm range, for precise 90° angles and plane-parallel surfaces in profile milling.
For the most demanding angular accuracy.
Cutter corner chamfer undefined due to eccentric relief grinding.
With maximum 0.008 mm tapering.
Extremely high taper accuracy with tolerances in the µm range, for precise 90° angles and plane-parallel surfaces in profile milling.
For the most demanding angular accuracy.
Cutter corner chamfer undefined due to eccentric relief grinding.
With maximum 0.008 mm tapering.
Application:
For peripheral milling as a finishing operation.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide high precision milling cutter 16 mm |
||
| Corner chamfer angle | 90 degrees | 90 degrees |
| Colour ring | green | without |
| Flute length Lc | 32 mm | 32 mm |
| Helix angle | 45 degrees | 45 degrees |
| Tolerance nominal ⌀ | f8 | h10 |
| Feed fz for side milling in steel < 900 N/mm2 | 0.08 mm | 0.089 mm |
| Shank ⌀ Ds | 16 mm | 16 mm |