{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter HPC, TiAlN, ⌀ DC: 2mm
Article no.: 203212 2
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: 0 / -0.02
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 2 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / -0.02 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 6 mm | |
| Overall length L | 58 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 70 HRC | 0.018 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification & Classification
| Article number |
203212 2
Copy |
|
| EAN / GTIN |
4045197640758
Copy |
|
| Manufacturer number |
203212 2
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
H
ISO code:
145
suitable for / [m/min]
H
ISO code:
100
suitable for / [m/min]
H
ISO code:
80
suitable for / [m/min]
H
ISO code:
75
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
GARANT Diabolo 70:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerance:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerance:
- Size nominal ⌀: DC ≤ size 12: 0 / −0.02 mm;
- Size nominal ⌀: DC from size 16: 0 / -0.03 mm.
Application:
Due to the special hard geometry ideal for use on hardened materials from 60 HRC to 70 HRC.
For profile milling as finishing.
(Plunge cutting only to shallow depths.)
For profile milling as finishing.
(Plunge cutting only to shallow depths.)
Note:
For materials > 65 HRC: ae = 0.02×D.