{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu solid carbide milling cutter HPC, DLC, ⌀ h6 DC: 16mm
Article no.: 203205 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 5
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 16 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 5 | |
| Helix angle | 38 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 80 mm | |
| Overhang length L1 incl. recess | 88 mm | |
| Recess ⌀ D1 | 15.5 mm | |
| Overall length L | 134 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in short-chipping aluminium | 0.06 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203205 16 | |
| EAN / GTIN | 4062406120016 | |
| Manufacturer number | 203205 16 |
Application Table
N
500
N
450
N
400
N
180
N
140
N
180
N
130
N
110
N
160
N
140
N
140
N
120
N
140
N
260
N
140
N
120
Description
Version:
For finishing operations.
Special geometry for optimum chip evacuation.
Unequal spacing gives high intrinsic stability and smooth cutting action.
For profile milling as a finishing operation.
Special geometry for optimum chip evacuation.
Unequal spacing gives high intrinsic stability and smooth cutting action.
For profile milling as a finishing operation.
Note:
Order the uncoated version using No. 203209.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
GARANT Master Alu solid carbide milling cutter HPC, DLC, ⌀ h6 DC: 16mm |
|||||
| Colour ring | yellow | without | green | green | yellow |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Cutting edge ⌀ DC | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Tolerance nominal ⌀ | h6 | h10 | f8 | f8 | h6 |
| Direction of infeed | horizontal | horizontal | horizontal | horizontal | horizontal |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |