{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX Pro Steel solid carbide roughing end mill HPC 20 mm
Article no.: 203059 20
Article code:
- Tool material: Solid carbide
- Norm: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: 0 / -0.03
- No. of teeth Z: 4
Product details
Technical Data
| Serie | Pro Steel | |
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Norm | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | 0 / -0.03 | |
| No. of teeth Z | 4 | |
| Helix angle | 38 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 68 mm | |
| Overhang length L1 incl. recess | 84 mm | |
| Recess ⌀ D1 | 19.5 mm | |
| Overall length L | 150 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.09 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.11 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203059 20 | |
| EAN / GTIN | 4062406377229 | |
| Manufacturer number | 203059 20 |
Application Table
P
200
P
190
P
140
P
120
M
60
K
200
Description
Version:
For roughing and finishing.
Up to 0.5×D into solid material at very high feed rates with smooth cutting action. Extra-long version for avoiding interference contours.
Up to 0.5×D into solid material at very high feed rates with smooth cutting action. Extra-long version for avoiding interference contours.
Advantage:
Optimised flute form, eccentric relief ground, generous chip spaces.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
HOLEX Pro Steel solid carbide roughing end mill HPC 20 mm |
||||
| Through-coolant | no | no | no | no |
| Norm | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Cutting edge ⌀ DC | 20 | 20 | 20 | 20 |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 38 | 45 | 45 | 45 |
| No. of teeth Z | 4 | 4 | 4 | 4 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |