{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter MTC 16M mm
Article no.: 202270 16M
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 48 mm | |
| Overhang length L1 incl. recess | 58 mm | |
| Recess ⌀ D1 | 15 mm | |
| Overall length L | 108 mm | |
| Shank ⌀ Ds | 16 mm | |
| Shank form | HB | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.065 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.09 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202270 16M | |
| EAN / GTIN | 4045197763969 | |
| Manufacturer number | 202270 16M |
Application Table
N
480
N
440
N
400
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Description
Version:
With the latest generation of DLC coating sp2.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Lengths similar to DIN 6527 long.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Lengths similar to DIN 6527 long.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide milling cutter MTC 16M mm |
||||
| Overall length L | 108 mm | 108 mm | 108 mm | 110 mm |
| Through-coolant | no | no | no | no |
| Standard | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 45 degrees | 45 degrees | 35 degrees | 30 degrees |
| Machining strategy | MTC | MTC | HPC | HPC |