{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter MTC, uncoated, ⌀ DC: 8,5mm
Article no.: 202244 8,5
Article code:
- Schneidstoff: Solid carbide
- Standard: DIN 6527
- Type: W
- Toleranz Nenn-⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 8.5 mm | |
| Beschichtung | uncoated | |
| Schneidstoff | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Toleranz Nenn-⌀ | h6 | |
| No. of teeth Z | 3 | |
| Spiralwinkel | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Zustellrichtung | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Schaft | DIN 6535 HA to h6 | |
| Wuchtgüte mit Schaft | G 2.5 with HA | |
| Innenkühlung | no | |
| Machining strategy | MTC | |
| Flute length Lc | 22 mm | |
| Overhang length L1 incl. recess | 30 mm | |
| Recess ⌀ D1 | 7.9 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Schaftform | HA | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.03 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.04 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 202244 8,5 | |
| EAN / GTIN | 4045197654755 | |
| Manufacturer number | 202244 8,5 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
190
N
150
N
120
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Without 45º corner chamfer.
Without 45º corner chamfer.
Size 1–2 – tolerance: Size nominal ⌀ DC = e8.
Size 2.5–20M – tolerance: Size nominal ⌀ DC = h6.
Without 45º corner chamfer.
Without 45º corner chamfer.
Size 1–2 – tolerance: Size nominal ⌀ DC = e8.
Size 2.5–20M – tolerance: Size nominal ⌀ DC = h6.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
NEW GENERATION AVAILABLE! Recommended successor product is No. 202002.