GARANT Master Steel solid carbide slot drill, TiAlN, ⌀ D_C: 3mm

Article no.: 201646 3

⌀ D_C (mm):

Quantity

Product details

Series		Master Steel
Cutting edge ⌀ D_C		3 mm
Coating		TiAlN
Tool material		Solid carbide
Standard		DIN 6527
Type		N
Tolerance nominal ⌀		f8
No. of teeth Z		2
Helix angle		38 degrees
Direction of infeed		horizontal, oblique and vertical
Cutting width a_e for milling operation		Full slot cutting depth 1×D; 0.5×D for side milling
Shank		DIN 6535 HA to h6
Through-coolant		no
Machining strategy		HPC
Flute length L_c		7 mm
Overhang length L₁ incl. recess		13 mm
Recess ⌀ D₁		2.8 mm
Overall length L		57 mm
Shank ⌀ D_s		6 mm
Corner chamfer width at 45°		0.1 mm
Corner chamfer angle		45 degrees
Feed f_z for slot milling in steel < 750 N/mm²		0.01 mm
Feed f_z for side milling in steel < 750 N/mm²		0.011 mm
Colour ring		green
Type of product		End / face mill

260

240

190

180

150

250

Eccentric relief ground for stronger cutting edges.
Dimensions similar to DIN 6527.

Optimised flute geometry for improved chip evacuation.

Successor product to No. 201645.

	This article	Recommendations
	GARANT Master Steel solid carbide slot drill, TiAlN, ⌀ D_C: 3mm	GARANT Diabolo solid carbide slot drill HPC, TiAlN, ⌀ e8 D_C: 3mm	Solid carbide slot drill HPC, TiAlN, ⌀ D_C: 3mm	Solid carbide slot drill, TiAlN, ⌀ D_C: 3mm	GARANT Master INOX solid carbide slot drill HPC, TiAlN, ⌀ e8 D_C: 3mm
Coating	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN
Corner chamfer angle	45 degrees	45 degrees	90 degrees	45 degrees	45 degrees
Colour ring	green	red	red	green	blue
Standard	DIN 6527	DIN 6527	Manufacturer’s standard	DIN 6527	DIN 6527
Shank	DIN 6535 HA to h6	DIN 6535 HA to h6	DIN 6535 HA to h6	DIN 6535 HA to h6	DIN 6535 HA to h6
Helix angle	38 degrees	30 degrees	35 degrees	45 degrees	50 degrees
Type of product	End / face mill	End / face mill	End / face mill	End / face mill	End / face mill