{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 9,7 mm
Article no.: 201306 9,7
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 9.7 mm | |
| Coating | AlCrN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overhang length L1 incl. recess | 32 mm | |
| Recess ⌀ D1 | 9.5 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank form | HB | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.05 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.08 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201306 9,7 | |
| EAN / GTIN | 4045197862945 | |
| Manufacturer number | 201306 9,7 |
Application Table
N
280
N
200
P
120
P
110
P
100
P
70
P
60
M
70
M
50
K
90
Description
Version:
Dimensions similar to DIN 6527.
Improved coating for general-purpose applications in steel and cast iron.
Improved coating for general-purpose applications in steel and cast iron.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide milling cutter 9,7 mm |
||||
| Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.3×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;Full slot cutting depth 1×D | Full slot cutting depth 1×D ;Full slot cutting depth 1×D |
| Overall length L | 72 | 48 | 55 | 72 |
| Standard | DIN 6527 | Manufacturer’s standard | Manufacturer’s standard | DIN 6527 |
| Cutting edge ⌀ DC | 9.7 | 9.7 | 9.7 | 9.7 |
| Flute length Lc | 22 | 11 | 11 | 22 |
| No. of teeth Z | 2 | 3 | 3 | 3 |
| Shank ⌀ Ds | 10 | 10 | 10 | 10 |