{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 10 mm | |
Coating | TiAlN | |
Tool material | HSS PM | |
Standard | DIN 844 | |
Milling profile | HR | |
Tolerance nominal ⌀ | ±0.12 | |
No. of teeth Z | 5 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | DIN 1835 B to h6 | |
Through-coolant | no | |
Flute length Lc | 35 mm | |
Overhang length L1 incl. recess | 43 mm | |
Recess ⌀ D1 | 9.5 mm | |
Overall length L | 84 mm | |
Shank ⌀ Ds | 10 mm | |
Corner chamfer width at 45° | 0.3 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0.024 mm | |
Colour ring | green | |
Type of product | End / face mill |
Article number | 192860 10M | |
EAN / GTIN | 4045197108449 | |
Manufacturer number | 192860 10M |
This article |
Recommendations |
|
---|---|---|
Roughing end mill HSS-PM, TiAlN, ⌀ DC: 10Mmm |
||
Coating | TiAlN | TiAlN |
Corner chamfer angle | 45 degrees | 90 degrees |
Colour ring | green | without |
Overall length L | 84 mm | 84 mm |
Tolerance nominal ⌀ | ±0.12 | k10 |
No. of teeth Z | 5 | 4 |
Type of product | End / face mill | End / face mill |