{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill 6 mm
Article no.: 192850 6
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: js12
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 13 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.01 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192850 6 | |
| EAN / GTIN | 4045197108203 | |
| Manufacturer number | 192850 6 |
Application Table
N
120
P
78
P
55
P
55
M
17
N
92
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Economy version.
Centre cutting teeth for plunging.
Economy version.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Roughing end mill 6 mm |
||
| Coating | TiAlN | TiAlN |
| Overall length L | 57 | 57 |
| Standard | DIN 844 | DIN 844 |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Flute length Lc | 13 | 13 |
| Helix angle | 30 | 30 |
| Corner chamfer width at 45° | 0.3 | 0.3 |