{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drills, uncoated, ⌀ e8 DC: 11mm
Article no.: 191320 11
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 11 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 42 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 79 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.029 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191320 11 | |
| EAN / GTIN | 4045197101730 | |
| Manufacturer number | 191320 11 |
Application Table
N
150
N
37
P
28
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
Eccentric relief ground.
- Wide, precision ground chip flutes.
- Extremely fine workpiece surfaces due to precisely ground cutting edges.
- Special rake angle for aluminium.
Note:
For milling keyways.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Slot drills, uncoated, ⌀ e8 DC: 11mm |
||||
| Coating | uncoated | uncoated | TiAlN | uncoated |
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Colour ring | yellow | without | without | without |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Type | W | N | N | N |
| No. of teeth Z | 3 | 3 | 3 | 4 |